Combined cross-linking treatments of bovine serum albumin gel beadlets for controlled-delivery of caffeine

Combined cross-linking agents (CCLA) of microbial transglutaminase (MTgase) and ribose were applied during production of bovine serum albumin gels via incubation and heating treatment, respectively. CCLA produced stronger gels with lower protein solubility in disruptive solvents (1% sodium dodecyl sulphate plus 1% β-mercaptoethanol) as compared to BSA gels (BSA/Control) or gels produced using single cross-linking agents (SCLA) of MTGase or ribose. The gels were then converted into dried beadlets containing caffeine following a freeze-drying process. In-vitro controlled-release of caffeine and swelling ratio studies of the beadlets in artificial saliva or simulated gastric fluid indicated that CCLA beadlets had the slowest release of caffeine and the lowest swelling ratio as compared to other beadlets. Scanning electron microscopy (SEM) data suggested that the improved release and the lower swelling ratio were mainly due to the denser network formed within the CCLA beadlets that had restricted the diffusion of caffeine and hampered the enzymatic breakdown of the matrix. The additional protein cross-linkings formed as a result of MTgase incubation and ribose-induced Maillard reaction could provide a delay action in releasing caffeine that potentially extend the duration of the action of the drug during ingestion.     

Behavioral and Sublethal Effects of Structurally Related Lower Terpenes onMyzus persicae

The sesquiterpenes farnesol, caryophyllene oxide, and 2,10-bisaboladien-1-one (patent #9602748) and the monoterpenes citronellol and geraniol were tested for settling inhibition and chronic effects on the aphidMyzus persicae by means of an improved leaf-disk assay. Of these compounds, geraniol, famesol, and the natural bisabolene significantly inhibit settling in choice tests. Furthermore, application of the bisabolene to intactCapsicum annuum leaves did not cause phytotoxicity, but did affect the insects' probing behavior by decreasing the probing activity and the number of intracellular punctures. Both compounds significantly decreased offspring production. Of the compounds tested, the natural product bisabolene could be a promising lead for future development of aphid control agents.     

Physical and mechanical properties of flame retardant urea formaldehyde medium density fiberboard

Medium density fiberboard (MDF) is one of the widely used wood-based panels to manufacture building components such as furniture units for interior applications. Although MDF is an excellent product it is prone to fire hazard which should be enhanced using flame retardants during its manufacture. Properties of the flame retardant urea formaldehyde (UF) MDF made using a dry process from rubberwood fibers were investigated. Flame retardant chemicals that were evaluated include sodium aluminate, zinc borate and aluminum trihydrate, which were incorporated with rubberwood fibers to manufacture experimental MDF. Four concentration levels, 10%, 15%, 20% and 30% of fire retardants and 15% urea formaldehyde resin based on oven dry fiber weight were used to manufacture experimental panels. Physical and mechanical properties including thickness swelling, water absorption, bending characteristics, and internal bond strength of the samples were determined. Flame retardant properties of the panels were also investigated using a Cabinet Method along with char index, weight loss and size of ellipse area. Finally, thermogravimetry method was employed to analyze thermal properties of the MDF panels. The results showed that thickness swell and water absorption decreased as the flame retardant increased. The MOR was not affected by the flame retardant treatment for boards bonded with urea formaldehyde resin. The internal bond strength showed a small reduction compared with the controls as the flame retardant chemicals increased but not for boards treated with 5% aluminum trihydrate. When the concentration of flame retardant chemicals increased to 30%, the internal bond generally decreased. Char index, area of ellipse and weight loss reduced as the percentage of flame retardant increased. Sodium aluminate showed the best performance in reducing thermal degradation followed by aluminum trihydrate and zinc borate. Aluminum trihydrate cured closely resemble that of the control during the gelation test.     

Copper-Tungsten Composites Sprayed by HVOF

Copper and copper-tungsten composite coatings were produced by high-velocity oxy-fuel spraying (HVOF). After initial optimization of the spraying parameters, coatings of various compositions were made and their structure, composition, mechanical, thermal, and electrical properties were characterized. The HVOF technique was able to produce rather dense coatings with minimal oxide content and relatively good mechanical and thermal properties compared to, for example, plasma-sprayed coatings; however, the achieved tungsten content was quite low.     

Clarification of suspensions by colloidal gas aphrons

Colloidal gas aphrons (CGAs), generated from dilute solutions of four surfactants, were used to clarify palm oil mill effluent (POME), suspensions of microalgae and suspensions of three inorganic minerals. In POME and the algal suspensions, each CGA was most effective at a pH value close to the pK value of the surfactant concerned. This effect was not tested in the inorganic suspensions. The efficiency of air utilization was directly related to the concentration of solids in the suspensions, the size, density and nature of the solids having secondary effects. Comparison with data in the literature led to a general correlation embracing a variety of suspensions and flotation systems. Shedding of collected material from the foam layer was also a direct function of solids concentration. CGAs offer advantages over other systems of air-assisted flotation in relation to the requirements for equipment and to the management of process operations.     

Enzymatic interesterification of structured lipids containing conjugated linoleic acid with palm stearin for possible margarine production

Structured lipids containing conjugated linoleic acid as a functional ingredient were blended with palm stearin in the ratios of 30 : 70, 40 : 60, 50 : 50, 60 : 40 and 70 : 30 (wt/wt). The blends were subjected to enzymatic interesterification by Candida antarctica lipase. After interesterification of the blends, changes in the physical properties of the products, including lower melting points and solid fat contents along with different melting behaviors, were evidenced. Analysis of triacylglycerols (TAG) of the interesterified blends showed a decrease in the concentration of high‐melting TAG. X‐ray diffraction analysis revealed, that all the reacted blends were predominantly in the β' crystal form. The mixture could be used for the formulation of margarines or other, similar products.     

Thermoeconomic optimization for a finned‐tube evaporator configuration of a roof‐top bus air‐conditioning system

This paper presents a methodology of a design optimization technique that can be useful in assessing the best configuration of a finned‐tube evaporator, using a thermoeconomic approach. The assessment has been carried out on a direct expansion finned‐tube evaporator of a vapor compression cycle for a roof‐top bus air‐conditioning (AC) system at a specified cooling capacity. The methodology has been conducted by studying the effect of some operational and geometrical design parameters for the evaporator on the entire cycle exergy destruction or irreversibility, AC system coefficient of performance (COP), and total annual cost. The heat exchangers for the bus AC system are featured by a very compact frontal area due to the stringent space limitations and structure standard for the system installation. Therefore, the current study also takes in its account the effect of the variation of the design parameters on the evaporator frontal area. The irreversibility due to heat transfer across the stream‐to‐stream temperature difference and due to frictional pressure drops is calculated as a function of the design parameters. A cost function is introduced, defined as the sum of two contributions, the investment expense of the evaporator material and the system compressor, and the operational expense of AC system that is usually driven by an auxiliary engine or coupled with the main bus engine. The optimal trade‐off between investment and operating cost is, therefore, investigated. A numerical example is discussed, in which a comparison between the commercial evaporator design and optimal design configuration has been presented in terms of the system COP and evaporator material cost. The results show that a significant improvement can be obtained for the optimal evaporator design compared with that of the commercial finned‐tube evaporator that is designed based on the conventional values of the design parameters. Copyright © 2007 John Wiley & Sons, Ltd.     

Stability of PVDF hollow fibre membranes in sodium hydroxide aqueous solution

The stability of PVDF hollow fibre membranes in sodium hydroxide (NaOH) aqueous solutions were investigated in this study. PVDF hollow fibre membranes were prepared from each of the three commercial raw PVDF materials (Kynar 761, Solef 1015 and Solef 6010) from two major suppliers (Atofina Chemicals Inc., USA and Solvay, Belgium) for comparison purposes. The effect of NaOH concentration, treatment time and temperature on mechanical properties, thermal properties and crystalline structure of the PVDF hollow fibre membranes were investigated through mechanical strength measurement, surface area analysis, XRD, FTIR and DSC analyses. The obtained results indicate that the reaction between PVDF and NaOH was initiated even at low concentrations of NaOH and was aggravated with the extended treatment time, resulting in the decrease in mechanical strength and crystallinity of PVDF hollow fibre membranes. The reaction was accelerated and intensified by increasing the concentration of NaOH and/or treatment temperature. At 70 °C, the mechanical integrity of the PVDF membranes was completely destroyed in 4 wt% NaOH solution within 24 h or in 10 wt% NaOH solution within 8 h. The deterioration of stability in NaOH solutions is considered universal for all PVDF employed in this study, irrespective of the raw materials or the corresponding hollow fibre membranes.     

Estimation of a Unique Pair of Nash Model Parameters: An Optimization Approach

Water resources planning and management requires hydrologic models to estimate runoff from a catchment. For catchments with limited data, the choice of model and identification of its parameters is very important for development of a direct runoff hydrograph. A method is presented to determine a unique pair of hydrologic parameters of the Nash Model, number of linear cascade (n) and storage coefficient (k), using optimization based on Downhill Simplex technique. In this study physical parameters of the catchment are derived from (SPOT) satellite imageries of the basin using ERDAS software. Four different objective functions of varying complexity are tested to find the best solution. Weighted root mean square error (RMSE) and Model Efficiency (Nash-Sutcliffe coefficient) are used to evaluate the model performance. Using the NASH model, a direct surface runoff hydrograph (DSRH) is developed. Kaha catchment is part of Indus river system and is located in the semi-arid region of Pakistan. This catchment is dominated by hill torrent flows and is used in this work to demonstrate the applicability of the proposed method. Ten randomly selected rainfall-runoff events are used for calibration and five events are used for validation. Model results during validation are very promising with model efficiency exceeding 93% and error in peak discharge under 8%. The sensitivity of the Nash model output in response to variation in hydrologic parameters n and k is also investigated. When evaluating the hydrologic response of large catchments, model output is more sensitive to n as compared to k indicating that the runoff diffusion phenomenon is dominant compared to translation flow effects.     

Magnetic Properties of Mechanically Alloyed Cobalt-Zinc Ferrite Nanoparticles

In this work, the physical and the magnetic properties of cobalt-zinc ferrite nanoparticles, synthesized via high-energy ball milling (HEBM), were examined. X-Ray diffraction (XRD), field emission scanning electron microscopy (FeSEM), and scanning transmission electron microscopy (STEM) were used to study changes of the powder structure and morphology analyses. Hysteresis and permeability measurement were carried out using a BH hysteresisgraph system and an impedance analyzer, respectively. The results suggested improved magnetic properties of Co_0.5Zn_0.5Fe₂O₄ with increasing sintering temperature from 950 °C up to 1200 °C. However, the variations of the magnetic responses were consistent with the varying volume concentration of the ferrite composites. Unlike the highly crystalline pure ferrite which showed magnetic resonance within the measured frequency, the crystallineamorphous composites showed no visible resonance peak. This proved that the resonance peak shifted to higher frequency as a result of the single domain spin behavior in the absence of domain walls movement.